La montre Magnus

1 minute read
La Magnus est la montre parfaite pour ceux qui aime les objets mécaniques parfaitement construits.

Ce communiqué n'est disponible qu'en anglais.

Press releaseHeritage Watch Manufactory_329649_0


Perfect in itself and perfect for everyone who loves perfectly constructed mechanical objects in their purest form. Its precision balance, the special mechanisms for fine regulation of the escapement, the balance cock and even the balance wheel are completely unique. This design is available in two variants — while the dial of the Magnus Contemporaine shows a perfectly executed interplay of space and volume, the Magnus Classic reflects the business-like finesse of the watch.


Main characterisctics

Type: 3-hand watch
Hands: Hours/minutes/small seconds (at 6 o'clock)

Technical features

- Independant manufacture Calibre: Cal. 800
- 3 patents pending
- Fully hardened parts
- 100% Swiss Made

Casing

Design: Eric Giroud
Casing variants:
- Polished/satinised steel
- White gold or red gold (Classic only)
Waterproof to: 50 m
Length over strap-holding bridges: 53.10 mm
Casing diameter: 42.50 mm
Casing height, total: 13.05 mm
Casing height, without crystal: 10.30 mm
Crystal: Domed sapphire glass
Casing back crystal: Flat sapphire glass

Dial

Design: Eric Giroud
Shock resistance: Dial positioned by means of pins, screwed directly onto the movement
Dial variants: Magnus Classic
- Brass/tracery: blue (steel casing)
- Gold, with gold applications/tracery: anthracite (gold casing)
Magnus Contemporaine
-Brass, with brass applications
Hands: Hardened steel
Bracelet: Leather/alligator, with pin buckle
Bracelet size: Strap-holding bridges: 22 mm/buckle: 20 mm

Movement

Calibre n°: HWM Cal. 800
Diameter: 38.30 mm
Height: 6.10 mm
Jewels: 33
Escapement type: Swiss lever escapement; capillary phase to improve oil retention
Balance: Mass-regulated Vivax balance/16 mm/patent pending
Balance spring: Over-coil hairspring (Breguet)
Fine regulation: Tenere fine adjustment/patent pending
Semi-oscillations: 18 000/h
Mainspring barrel diameter: 17.40 mm
Moment of inertia: 126 mgmm²

Gear train

Gear tooth system: Cycloid gear teeth
Pinions: Fully hardened steel pinions
Gears: Copper beryllium
Mainspring barrel: Copper beryllium
Screws: Steel, blued and polished
Power reserve: 50h

Decoration

Movement plates: Diamante bevelled